10x Marston-Domsel MD CA-STAR 2K 10ml - thixotropic
Product.Nr.: 1
EUR
150.30
EUR 150,30
incl. 19 % VAT
Shippingcosts
- Die Versandkosten werden im Check-out abhängig von ihren gewählten Produkten und Zielland berechnet.
product description
Product description
Best adhesive properties on many different materials: metal, many plastics, e.g. PVC, ABS, PC, PBT, rubber, porous/absorbent materials such as wood, paper, cardboard, leather and textiles.
- Low efflorescence
- Thixotropic
- Drip-free
- Extremely impact resistant
- Mechanically workable
- Gap filling capacity 6mm
- Overhead and vertical applications
- Transparent bonding of PMMA
- Resistant to petrol and diesel
- Delivery form: 10x 10g cartridge
Application instructions
Surfaces must be clean, dry and free of grease. To assemble the double syringe, first insert the plunger, then remove the cap and attach the static mixer. Dispose of the first inch of material.
Apply MD STAR 2K to one of the two surfaces and assemble the two parts within 1 minute.
After applying MD CA-Star 2K, there are approx. 5-60 seconds for positioning (depending on the material). Final strength is achieved after 24 hours.
Delivery time: approx. 10 working days
Component A
Danger
Signal word ATTENTION
Hazard statements
H315 Causes skin irritation.
H319 Causes severe eye irritation.
H335 May cause respiratory irritation.
Precautionary statements
P101 If medical advice is needed, have container or label at hand.
P261 Avoid breathing vapour/aerosol.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves / eye protection / face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
P405 Keep locked up.
P501 Dispose of contents/container in accordance with local/national regulations.
Component B
-
Downloads
Technische_Information_MD_MGL_Star.pdf
(0.12 MB)
Recommended products
