5x Sanremo dowel adhesive 25ml + 10 mixing nozzles + 10 sieve sleeves, 15 minutes epoxy
Product.Nr.: 1
EUR
27.25
EUR 27,25
incl. 19 % VAT
Shippingcosts
- Die Versandkosten werden im Check-out abhängig von ihren gewählten Produkten und Zielland berechnet.
product description
Product description
Fast curing, pasty 2-component adhesive with high strength for impact resistant bonding. Bonding of dowels and anchors in wood, stone, concrete, masonry, plasterboard, insulating materials, and many more. The adhesive is joint-filling, usable up to +60°C. Substrate: Solid, clean, dry, grease-free. Light roughening of the surface increases the strength. Insert cartridge into cartridge press for 310ml silicone cartridges, squeeze out adhesive, mix by hand and apply.
Or: Screw on mixing nozzle and squeeze out material until uniform mixture is obtained, then process.
- With delayed curing
- Consistency: Pasty, stable
- Gluing in dowels + fasteners
Substrate: stone, masonry, concrete, natural stone, wood, rigid PVC, gypsum plasterboard, screed life, filling, leveling
Processing
NOTE: Carry out test bonding in advance.
At lower temperatures the processing and curing time for adhesives is extended, at higher temperatures it is shortened. The higher the processing temperature of the cartridge, the easier it is to squeeze the paste-like adhesive out of the cartridge. At low ambient temperatures, the cartridge must be heated to at least +20° C or higher to ensure easy squeezing out of the cartridge.
Due to the viscosity of the material, it is difficult to squeeze out the 25ml cartridges by hand. It is recommended to place the 25ml cartridges in a half-shell - squeezing gun for 310ml cartridges and squeeze them out with it.
Signal word CAUTION
Hazard statements
H315 Causes skin irritation.
H319 Causes severe eye irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P261 Avoid inhalation of vapour.
P273 Avoid release to the environment.
P280 Wear protective gloves and eye/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
P362 + P364 Remove contaminated clothing and wash before reuse.
P501 Dispose of contents/container to industrial incinerator.
Downloads
Recommended products
