Sanremo KompriPlus BG1 74mm / 7m (joint width 4-15mm, colour grey)
Product.Nr.: 1
EUR
33.00
EUR 33,00
incl. 19 % VAT
Shippingcosts
- Die Versandkosten werden im Check-out abhängig von ihren gewählten Produkten und Zielland berechnet.
product description
Sanremo KompriPlus is a pre-compressed and impregnated 3-level joint sealing tape for sealing all functional areas in window joint sealing.
The tape meets all requirements for airtight and driving rain-proof sealing.
The Sanremo KompriPlus can be used for sealing the window connection joint.
Due to the different tape widths and tape thicknesses, a wide variety of joint widths and window profile thicknesses can be sealed.
Product properties
- Meets the requirements of the guidelines of the RAL-Gütegemeinschaft Fenster und Türen e.V. (RAL Quality Association for Windows and Doors).
- Impervious to driving rain up to 1050 Pa according to EN 1027
- Airtight / complies with DIN 18542 : 2011 = BGR
- Weatherproof: BG1 tested, test no.: 091598.1 - Sz
- Installation independent of weather conditions
- Proof of permanent serviceability/functionability for various wall constructions by means of a
- wall constructions by means of a thermal-hygric building simulation calculation by the BBS Institute in Wolfenbüttel ( test report no. 2008772-3)
- Vapour diffusion gradient of 4 : 1 (no danger of confusion between inside and outside due to functional membrane)
- sd-value calculated with 64 mm width: 0.6 sd outside and > 2.4 sd inside
- Very low emission EMICODE® - EC 1 Plus
- System-tested (component test ift no. 11-001136-PR01)
Technical data
- Building material classes / fire behaviour: B 2 (P-NDS04-717, MPA Hannover)
- Temperature resistance: -30°C to +80°C
- Thermal conductivity (DIN 52612): λ = 0.0428 W/m*K (MPA Hannover)
- Air tightness (EN 1026): an ≤ 0.1c
- Water tightness against driving rain (EN 1027): > 1050 Pa
- Sound insulation (DIN EN ISO 140-3): 58 dB without covering (ift Rosenheim)
- Vapour diffusion resistance (EN ISO 12572): μ < 100 - outside
- Water vapour diffusion, Sd value (EN ISO 12572): > 0.6 m (from 56 mm width) outside / 2.4 m inside
- Weather resistance: BG1 tested, test no.: 091598.1 - Sz, DIN 18542
- Thermal-hygric component simulation: "Over-hygroscopic water contents up to condensation inside the component are not to be expected."
- (Research and Materials Testing Institute for Applied Building Physics and Materials in Construction, Wolfenbüttel)
- Compatibility with conventional building materials: given
- Working temperature: -5°C to +40°C
- Shelf life: 9 months, dry, at room temperature in original container
- Functional guarantee: 10 years under the manufacturer's conditions, which will be sent on request.
Downloads