Sanremo model making glue 2x140ml + 4 mixing nozzles + squeezing pusher
Product.Nr.: 1
EUR
38.90
EUR 38,90
incl. 19 % VAT
Shippingcosts
- Die Versandkosten werden im Check-out abhängig von ihren gewählten Produkten und Zielland berechnet.
product description
Product description
Fast curing, pasty 2-component epoxy adhesive with high strength. Bonding, filling, modelling on various materials: Wood, stone, hard PC, foam materials, etc. Filling of depressions, cracks and crevices. Can be extended up to 0mm.
The adhesive is stable, can be sanded and painted over after curing, suitable for drilling. Substrate: Solid, clean, dry, grease-free. Roughening the surface increases the strength. Insert cartridge into cartridge press for 310ml silicone cartridges, squeeze out adhesive, mix by hand and apply.
Or: Screw on mixing nozzle and squeeze out until evenly mixed, then process.
- Universally usable
- High strength
- Consistency: Pasty, stable
- Sandable, paintable
Processing
NOTE: Carry out test bonding in advance.
At lower temperatures, the processing and curing time for adhesives is prolonged; at higher temperatures, it is shortened. The higher the processing temperature of the cartridge, the easier it is to squeeze the paste-like adhesive out of the cartridge. At low ambient temperatures, the cartridge must be heated to at least +20° C or higher to ensure easy squeezing out of the cartridge.
Danger
Signal word CAUTION
Hazard statements
H315 Causes skin irritation.
H319 Causes severe eye irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P261 Avoid inhalation of vapour.
P273 Avoid release to the environment.
P280 Wear protective gloves and eye/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.
P362 + P364 Remove contaminated clothing and wash before reuse.
P501 Dispose of contents/container to industrial incinerator.
Downloads
Recommended products
