Sanremo Natural Stone Adhesive 2x140ml + 4 mixing nozzles + squeezing pusher
Product.Nr.: 1
EUR
38.90
EUR 38,90
incl. 19 % VAT
Shippingcosts
- Die Versandkosten werden im Check-out abhängig von ihren gewählten Produkten und Zielland berechnet.
product description
Product description
Fast curing, pasty 2-component adhesive with high strength. Bonding and filling on natural stone. Bonding of metals into natural stone. The adhesive is joint-filling, grindable after curing and paintable. Substrate: Solid, clean, dry, grease-free. Roughening the surface increases the strength. Insert cartridge into cartridge press for 310ml silicone cartridges, squeeze out adhesive, mix by hand and apply. Or: Screw on mixing nozzle and squeeze out until evenly mixed, then process.
- Universally applicable
- High strength
- onsistence: Pasty, stable
- Sandable, paintable
Processing
NOTE: Carry out test bonding in advance.
At lower temperatures the working and curing time of adhesives is prolonged, at higher temperatures it is shortened. The higher the processing temperature of the cartridge, the easier it is to squeeze the paste-like adhesive out of the cartridge. At low ambient temperatures, the cartridge must be heated to at least +20° C or higher to ensure easy squeezing out of the cartridge.
Danger
Signal word CAUTION
Hazard statements
H315 Causes skin irritation.
H319 Causes severe eye irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P261 Avoid inhalation of vapour.
P273 Avoid release to the environment.
P280 Wear protective gloves and eye/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.
P362 + P364 Remove contaminated clothing and wash before reuse.
P501 Dispose of contents/container to industrial incinerator.
Downloads
Recommended products
Customers also purchased
