Sanremo Repair Epoxy 2x140ml + 4 mixing nozzles + squeeze pusher

Product.Nr.: 1

EUR 38,90
incl. 19 % VAT

  • delivery time 1-2 Tage
Shippingcosts
  • Die Versandkosten werden im Check-out abhängig von ihren gewählten Produkten und Zielland berechnet.

product description

Product description 
Fast curing, pasty 2-component adhesive with high strength for impact resistant bonding. Repairs on a wide variety of substrates: Wood, stone, concrete, masonry, plasterboard, insulating materials, etc. The adhesive is joint-filling, usable up to +60°C. Substrate: Solid, clean, dry, grease-free. Light roughening of the surface increases the strength. Insert cartridge into cartridge press for 310ml silicone cartridges, squeeze out adhesive, mix by hand and apply. 
Or: Screw on mixing nozzle and squeeze out until evenly mixed, then apply.

 

  • Universally applicable
  • High strength
  • Consistency: Pasty, stable
  • Bonding, filling, levelling
  • Sandable, paintable
 

Processing 
NOTE: Carry out test bonding beforehand.  
At lower temperatures, the processing and curing time for adhesives is extended; at higher temperatures, it is shortened. The higher the processing temperature of the cartridge, the easier it is to squeeze the paste-like adhesive out of the cartridge. At low ambient temperatures, the cartridge must be heated to at least +20° C or higher to ensure easy squeezing out of the cartridge.

 

Danger

Signal word CAUTION

Hazard statements

H315 Causes skin irritation.
H319 Causes severe eye irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.




Precautionary statements

P261 Avoid inhalation of vapour.
P273 Avoid release to the environment.
P280 Wear protective gloves and eye/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.
P362 + P364 Remove contaminated clothing and wash before reuse.
P501 Dispose of contents/container to industrial incinerator.