Sanremo4you EPDM film adhesive / rubber adhesive 4kg
Product.Nr.: 1
EUR
67.90
EUR 67,90
incl. 19 % VAT
Shippingcosts
- Die Versandkosten werden im Check-out abhängig von ihren gewählten Produkten und Zielland berechnet.
product description
Product description
- Solvent-based contact adhesive
- Bonding EPDM films, rubber materials, sealing membranes, to each other and to structural substrates such as: Concrete, stone, masonry, eternit, wood, metal and many more.
- Versatile adhesive for bonding e.g.: EPDM films, polyethylene films (e.g. as vapor barrier), polyethylene foam, polyurethane rigid or flexible foam, PVC rigid, with each other and on various substrates.
- Not suitable for PVC soft adhesives and polystyrene foam.
- Good moisture and UV resistance
- Very good initial adhesion (contact adhesion)
- Temperature resistance -20°C to +60°C
In general and especially for solvent-sensitive substrates, carry out test bonding.
Processing
The surfaces to be bonded must be dry, clean and free of dust and grease. Apply the adhesive thinly and evenly to both parts to be bonded. After a waiting time, depending on temperature and humidity, place the parts together and press on well. Suitable: Plastic roller. The waiting time depends on room temperature, application thickness, absorbency, the substrate, etc. The parts should be joined when the adhesive film is still slightly tacky, but no longer sticks to the finger when light finger pressure is applied. Tools and substrates Clean with Sanremo EPDM Cleaner.
Signal word DANGER
Hazard statements
H225 Highly flammable liquid and vapor.
H315 Causes skin irritation.
H319 Causes severe eye irritation.
H317 May cause allergic skin reaction.
H336 May cause drowsiness and dizziness.
H411 Toxic to aquatic life with long lasting effects.
Safety advice
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P243 Take precautionary measures against static discharges.
P261 Avoid breathing mist/vapor/aerosol.
P271 Use only outdoors or in well-ventilated areas.
P273 Avoid release to the environment. P280 Wear protective gloves/eye protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue to rinse.
P337+P313 If eye irritation persists: Get medical advice/attention.
P403 Store in a well-ventilated place.
Downloads
Recommended products
Customers also purchased
