Set 15: 10x anchor rod M8x110mm galvanized + 10x sieve sleeve 13x100mm
Product.Nr.: 1
EUR
8.90
EUR 8,90
incl. 19 % VAT
Shippingcosts
- Die Versandkosten werden im Check-out abhängig von ihren gewählten Produkten und Zielland berechnet.
product description
Set consisting of:
- 10x anchor rod M8x110mm galvanized
- 10x sieve sleeve 13x100mm for M8-M10
Product description
ANCHOR ROD/COMPOSITE ANCHOR
- with nut and washer
- Steel grade 5.8 with galvanized surface.
- For gluing into masonry and concrete with composite mortar.
PLASTIC SIEVE SLEEVE
When installing in hollow masonry, use a sieve sleeve. Insert sieve sleeve into the drilled hole. Then fill sieve sleeve completely with composite mortar. Then screw the threaded rod / anchor into the sieve sleeve with rotating movements.
By screwing in the threaded rod, air pockets in the composite mortar are removed,
the composite mortar presses through the perforations of the sieve sleeve and bonds with the surrounding base material.
The sieve sleeve performs 2 functions:
- Holds the anchor rod/threaded rod in place.
- Prevents bonded mortar from inadvertently seeping into the cavities of the stone.